Hard Drive Drivers


In order to read the hard drive, Windows must have the motherboard storage controller drivers, unlike the BIOS setup. Windows setup usually loads all the hard disk drivers but if your motherboard was unveiled after the release of Windows 7, then there is a likelihood that your drivers are not loaded hence the hard disk cannot be detected. Manage arrays, set up email alerts, and measure the health of hard drives. View Support Information. Download for Windows Download for Mac(10.10 and above).

If you'd like to view detailed information about your hard disk drives, solid-state drives, or external storage devices attached to your computer, we recommend the methods below.

Seagate Hard Drive Drivers Download

System Information in Windows 10

In Windows 10, you can view information about your hardware (including disks) using the System Information utility.

To open the System Information utility in Windows 10:

  1. Press the Windows key, type System Information, and press Enter.

Or, you can use the Run box to open the System Information utility.

  1. Press the Windows key+R keyboard shortcut.
  2. In the Run box, type msinfo32.
  3. Press Enter or click OK.
  1. In the System Information window that opens, in the left window pane, you'll see a list of hardware categories. Expand Components, then Storage. Then, choose Drives, Disks, or any category you'd like to view.

Earlier versions of Microsoft Windows

In earlier versions of Microsoft Windows, you can open the System Information utility by following the steps below.

  1. Click Start and then click the Programsfolder.
  2. Click Accessories and then the System Information or System Tools folder.
  3. Open the System Information file.
  4. In the System Informationwindow, click the + symbol next to Components.
  5. Click the + next to Storage and click on Drives. In the right-side of the window, you'll see information about the hard drive including its capacity and serial number.

IBM-compatible users

IBM-compatible users can usually enter the computer's BIOS setup to view additional information about their hard drive. Commonly, the CMOS lists the hard drive's serial number, model number, cylinders, heads, sectors, and the size of the hard drive.

NoteHard drive drivers windows 10

If the CMOS is not configured to auto-detect the hard drive, it is important to note that the hard drive values may not be correct.

Determining the speed or RPM of a hard drive

To determine the speed or RPM of a hard drive, you must first determine the manufacturer and model of the hard drive. Once you've determined this information, you can look up the drive on the manufacturer's web page to determine the RPM of the drive.

Some manufacturers also list the RPM of the hard drive on the actual drive. World of tanks blitz - grand pack download for mac torrent. If you open the computer and remove the hard drive, look on the top sticker to see if the RPM is listed.

Third-party utilities

There are many free software utilities designed to detect the hardware in your computer. These utilities can display the model of your hard drive and additional information.

Other disk utilities

Many disk utilities designed to set up the hard drive will properly detect and configure it. Also, these utilities may also provide the user with some basic additional information about the hard drive.

For example, using the fdisk utility you can display additional information about the size of the hard drive and partition information.

Other methods of determining the hard drive

One of the best methods for determining additional information about a hard drive is to obtain information directly off the hard drive. The majority of hard drives have a sticker on the top of the drive that contains complete information about the drive. If you cannot locate the information you need through software, we recommend you open the case and remove the hard drive to get the information you need.

Hard Drive Drivers

Product listing or specifications

Hard Drive Drivers Windows 10

If you're trying to list all the specific information about your computer, specifying the manufacturer, model, type, and size of the hard drive is sufficient. Below is an example of how this may look.

Maxtor 54098H8 IDE 40Gig hard drive

Drivers or installation

Replacement or repair

If you're trying to determine the hard drive because it needs to be replaced or repaired, we recommend the drive be replaced with another hard drive. As long as you are using the same hard drive interface (IDE/SATA), the model or manufacturer of the previous drive should be irrelevant.

Additional information